-40%

RAE Systems PGM-6228 MultiRAE Multi Gas Detector Monitor w O2, CO, LEL, H2S, VOC

$ 659.97

Availability: 62 in stock
  • Brand: RAE Systems
  • Condition: AA Alkaline Battery Adapter AND Li Battery.
  • MPN: PGM-6228, PGM6228

    Description

    RAE Systems
    PGM-6228
    MultiRAE Multi Gas Detector Monitor
    w/
    INSTALLED
    O2, CO, LEL, H2S, VOC
    Good clean units!
    From a DoD contract. Items sent in for maint and new were purchased in interim.
    -Firmware v1.50
    -Sent in for maintenance 2019 when all units were calibrated. Has sat boxed ever since.
    -Sold as used, as shown in photos.
    Includes:
    -
    RAE Systems PGM-6228
    w/
    INSTALLED
    O2, CO, LEL, H2S, VOC
    -
    RAE Systems Rechargeable Li-ion Battery - M01-3053-000 (12hr battery life at peak)
    Battery tested and seems to hold charge.
    -
    RAE Systems Alkaline Battery Adapter for 4 AA-sized Batteries - M01-3054-000. Does not include batteries. (6hr battery life)
    -Rubber Boot
    -Swivel Belt Clip
    -User Manual Printout
    Associated, but may not be included (for reference):
    External 25mm Filter, luer fitting, for RAE Systems  008-3022-100
    RAE Systems Travel Charger / PC Communications Adapter (AC adapter or PC cable NOT included) - M01-3021-000
    RAE Systems External Battery Charger (no power adapter) - M01-3025-000
    RAE Systems Alkaline Battery Adapter for 4 AA-sized Batteries - M01-3054-000
    RAE Systems Rechargeable Li-ion Battery - M01-3053-000
    From manufacturer:
    RAE Systems MultiRAE Wireless Portable 1 to 6 Gas Monitor
    The PGM-6228 MultiRAE is the most advanced wireless portable chemical detector on the market with a 0.1 to 5,000 ppm PID sensor range, the broadest in its class. Certified to meet the military performance standard MIL-STD-810F, the MultiRAE can be configured with more than 30 intelligent sensors (including PID, NDIR, and exotics such as ammonia, chlorine, formaldehyde, and phosgene) to fully meet the monitoring needs of a variety of applications, including industrial hygiene, personal protection, multi-gas leak detection, and HazMat response.
    The instrument boasts the largest display and longest battery run time in its class (with an optional extended battery), as well as an ergonomically contoured case that is rugged, dust-tight and waterproof (IP-65 rating). A compartmentalized design of the MultiRAE makes the replacement of its sensors, pump, and plug-and-play battery simple, even in the field, and the AutoRAE 2 Automatic Test and Calibration System ensures bump testing and calibration of up to 10 instruments is as easy as a press of a button.
    When deployed on RAE Systems' Dedicated Wireless Network, the MultiRAE provides safety officers wireless access to real-time instrument readings and alarm status for better visibility and faster incident response. The MultiRAE five-way notification system for gas and Man Down alarms immediately alerts the user, people working in the vicinity, and safety officers at the command center if a hazardous atmosphere has been detected or a person has been overcome.
    RAE Systems MultiRAE Model PGM-6228 includes:
    MultiRAE Monitor with sensors, pump battery, and wireless option as specified, protective rubber boot, swivel belt clip, and filter installed
    Continuous datalogging (6 months for 5 sensors @ 1 minute intervals)
    Travel charger/PC communications adapter
    PC communications cable
    AC adapter
    Calibration adapter
    Alkaline battery adapter
    Hex tool
    Quick start guide
    CD with documentation
    ProRAE Studio II instrument configuration and data management software
    Calibration and test certificate
    Warranty/registration card
    Built-in pump
    Belt clip installed
    6" inlet probe
    3 spare external filters
    PID sensor cap removal
    Hardsided transport case
    Optional C
    onfined Space Kit (CSK1):
    Sample draw kit which includes 10 inch aluminum sample probe with replacement filters, 3 hydrophobic barrier filters, 10 feet self-coiling Teflon tubing with Luer-style quick connect fitting, 4 gas calibration cylinder mix (LEL, O2, H2S, & CO) and regulator
    PHYSICAL FEATURES
    Size
    7.6 x 3.8 x 2.6 in.
    Weight
    31oz
    Humidity
    0% to 95% RH (non-condensing)
    Temperature
    -4 to +122
    o
    F
    EMI/RFI
    EMC directive: 2004/108/EC. No effect when exposed to 0.43mW/cm2 RF interference from a 5 watt transmitter @ 12"
    IP Rating
    IP65
    Number of buttons
    3
    Gases offered
    VOC, LEL, NDIR LEL & CO2, NH3, CO, H2S, Cl2, ClO2, EtO-A, EtO-B, EtO-C, HCHO, H2, HCl, HCN, HF, CH3-SH, NO, NO2, O2, COCl2, PH3, SO2
    Maximum sensors used
    6
    Battery types and run time
    Lithium-ion 12 hours.
    Extended Li-ion 18 hours. (4) Four AA alkaline 6 hours.
    Wireless capable
    Yes
    ALARMS
    Adjustable alarm set points
    Yes
    Visual
    Flashing bright red LED's, and on screen indication of alamr conditions. Man Down Alarm with prealarm and real time remote wireless notification
    Vibrating
    Yes
    Audible
    95dB
    IntelliFlash
    No
    Certifications and approvals
    Class I, Div. 1, Gr. A,B,C,D, T4
    CSA, IECEx, ATEX
    Datalogging
    Continuous datalogging 6 months for 5 sensors @ 1 minute intervals.
    User configurable
    Pump Available
    Yes, only avaialble with pump
    Pump Max draw
    Not specified
    Warranty
    Two years on nonconsumbable components and catalytic LEL, CO, H2S, and O2s sensors. One year on all other sensors, pump, battery, and other comsumable parts.
    Bump/Calibration Test Station
    Yes