MSA Ultima XE Gas Monitor XP-E-46-U-3-D-2

Description

Ultima XE Gas Monitor – Explosion-proof, stainless steel gas detector with display The Ultima XE Gas Monitor offers: • Explosion-proof 316 stainless steel. • Multiple-entry mounting enclosure. • Type 4X, IP66.
Ultima X Series Gas Monitors are well-suited to indoor and outdoor applications in virtually any industry including offshore, refineries, chemical and petrochemical facilities, steel mills, water and wastewater plants, mining, and general industry. • Continuous hazardous gas monitoring using catalytic, electrochemical, and infrared gas detection methods. • DuraSource Technology provides extended infrared sensor life • HART Field Communications Protocol option for improved asset management • Patented sensor disconnect-under-power allows sensor changeout without declassifying a hazardous area • Interchangeable smart sensors: pre-calibrated, installation-ready sensor modules, field-replaceable without tools • New sensor type quick recognition and reconfiguration of alarm and relay settings • LCD conveniently alternates between sensor reading and gas type, plus scrolling messaging for ongoing diagnostic checks • Single-board design for ultimate reliability and serviceability Acetylene IR- 0-2.5% Ammonia- 0-50% LEL Ammonia- 0-100 PPM Ammonia- 0-1000 PPM Arsine- 0-2 PPM Bromine- 0-5 PPM Carbon dioxide IR- 0-0.5% Carbon dioxide IR- 0-2% Carbon dioxide IR- 0-5% Carbon monoxide- 0-100 PPM Carbon monoxide- 0-500 PPM Carbon monoxide- 0-1000 PPM Chlorine- 0-5 PPM Chlorine- 0-10 PPM Chlorine- 0-20 PPM Chlorine dioxide- 0-3 PPM IR combustible gas - Methane- 0-100% LEL IR combustible gas - Non-methane- 0-100% LEL Combustible gas- 0-100% LEL natural gas and H2 Combustible gas- 0-100% LEL petroleum vapors Combustible gas0-100% solvents Diborane- 0-50 PPM Ethylene oxide- 0-10 PPM Fluorine- 0-5 PPM Hydrogen fluoride- 0-10 PPM Hydrogen- 0-1000 PPM Hydrogen chloride- 0-50 PPM Hydrogen cyanide- 0-50 PPM Hydrogen sulfide- 0-10 PPM Hydrogen sulfide- 0-50 PPM Hydrogen sulfide- 0-100 PPM Hydrogen sulfide- 0-500 PPM Nitric oxide- 0-100 PPM Nitrogen dioxide- 0-10 PPM Oxygen- 0-10% - compensated Oxygen- 0-25% - compensated Oxygen - CO2 tolerant- 0-25% Oxygen - solvent tolerant0-25% Phosphine- 0-2 PPM Silane- 0-25 PPM Sulfur dioxide- 0-25 PPM Sulfur dioxide- 0-100 PPM Gases Ultima X Series installation and operation are both simple and flexible: • Operates in diffusion mode, with factory-calibrated sensors ready to perform immediately after installation • Offers HART upgrade of existing units via replacement PCBA • Available for remote sensing applications, where installations require sensor to be separated from electronics • Can operate completely stand-alone with large LCD display, optional quick-check LEDs, and 4 relay outputs (3 alarm and 1 fault), or connected with standard 4-20 mA output to a control system (PLC, DCS, etc) • Adjustable full-scale range • Easy installation with 2-piece, field-wiring connectors
WE DO NOT ACCEPT RETURNS
Shelf: 15A5