Martin JEM ZR44 Hi Mass Fog Machine Parts ***USED*** Hazer Remote Control Knob

Description

Martin JEM ZR44 Hi Mass Fogger Machine Parts
***USED PARTS SALVAGE***
Remote Control Knob, Output Delay Run
***LAST OF 3 KNOBS SPLD HAS SLIGHT DING IN IT***
***SEE PHOTOS***
Remote Control Knob, Remote To Hazer Chassis
***SOME SIGNS OF WEAR UPON EXTRACTION***
Remote Control Interface, PCBA ZR22/33 PN/62020506
Remote Control Interface, Screw Assembly
Remote Control XLR, Male 3pin NC3MPP PN/05243001
w/ Cable Assembly
Remote Control XLR, Female 3pin NC3FPP
Remote Control Spacer, 19/32" Main Remote PCB
Remote Control Nut, Main Remote PCB
Cable, 12" 3wire Main 6pin To Remote 3pin
Cap, Fluid Container
Tube, 16.5" Black Thick
Tube Clamp, Black Thick
Tube, 7" Clear Thin
Tube, 2" Clear Thin
Potentiometer, B104 (Avg 3.8 Ohm-91.6 kOhm)
***DC RESISTANCE TESTED***
***ALL POTS FUNCTION SMOOTH MECHANICALLY***
***ALL POTS MIGHT HAVE HAZE FLUID IN THEM***
***POTS WILL BE SOLD FROM HIGH RESISTANCE TO LOW***
Switch, Grey Button Cap
***TESTED, NO FAULTS FOUND***
LED, Green
***TESTED, NO FAULTS FOUND***
LED, Red
***TESTED, NO FAULTS FOUND***
https://www.martin.com/en-US/products/jem-zr44-hi-mass
"The Jem ZR44 Hi-Mass™ is a reliable and highly efficient fogger capable of precise fog delivery from subtle to massive. Ideal for a variety of settings from small venues to huge stadiums and arenas, it features advanced technology for top-quality performance, as well as advances in digital functionality such as RDM compatibility.
FEATURES
3 & 5 pin DMX interface
Prepared for multifunctional digital remote
RDM capable
Floor standing or truss mounting
Neutrik PowerCon connector
1200 m³/min fog output
Continuous output
Tough and solid design
1800 W heat exchanger
7.5 min heat-up time
Indirect Fluid Sensing System
Proprietary Pro Steam Simulation fluid solution
Different fluid options for different applications
Leaves no oil residue on light fixtures
Soft Start technology
SPECIFICATIONS
PHYSICAL
Length: 687 mm (27.1 in.)
Length with optional drip tray: 752 mm (30.0 in.)
Width: 379 mm (15.0 in.)
Height: 248 mm (9.8 in.)
Height with hanging bracket: 353 mm (13.9 in.)
Weight, dry: 19.0 kg (41.9 lbs.)
Weight, filled: 28.5 kg (62.9 lb.)
PERFORMANCE
Coverage volume: 1200 m3 (42,378 ft3) per minute
Fluid consumption (maximum): 120 ml/minute
Continuous effect output
Ready time: 10 minutes
CONTROL AND PROGRAMMING
Control options: Integrated analog remote control, DMX, optional digital remote control, master/client link mode
Control parameters: Continuous or timer-controlled variable output
Fog: Variable output control, 0-100%
DMX channels: 1
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
CONSTRUCTION
Color: Black, silver
Housing: Steel and aluminum
Fluid reservoir: 9.5 liter drop-in
Hanging bracket: Integrated yoke with safety attachment point
Heat exchanger: 1800 W, thermally protected
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
External fluid control: Fluid sensing
Drip tray: Optional, bolt-on tray with reusable collection sponge
INSTALLATION
Mounting: Standing or hanging
Orientation: Up to +/- 45° from horizontal
Clearance around machine: 100 mm (4 in.)
CONNECTIONS
AC power: Neutrik PowerCon
DMX, link mode in/out: 3- and 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
ELECTRICAL
EU Model
AC power: 220-240 V, 50/60 Hz
Main fuse: 10 AT (slow blow), 250 V
Typical power and current: 1890 W, 8.3 A*
US Model
AC power: 100-130 V, 50/60 Hz
Main fuse: 20 AT (slow blow), 125 V
Typical power and current: 1890 W, 14.6 A*
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
THERMAL
Exterior surface temperature, steady state: 50° C (122° F)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Max. nozzle temperature: 200° C (392° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
APPROVALS"