Martin Jem Roadie X-Stream Smoke/ Fog Machine

Description

Martin Jem Roadie X-Stream Smoke Machine. Unit is in Good Condition. Comes as you see it. Comes with Heavy Duty Road Case.
FREE SHIPPING TO THE LOWER 48 STATES.
NO FREE SHIPPING FOR INTERNATIONAL. FOR INTERNATIONAL SHIPPING, YOU WILL HAVE TO ARRANGE FOR YOUR OWN CARRIER.
Any questions, please call 718-767-2182
Jem Roadie X-Stream™ Specifications
The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.
Features
Output and density level control
Continuous output
5000 m³/min fog output
Integrated high velocity fan
2 x 2500 W heat exchanger
18 min heat-up time
For vertical or horizontal effect projection
2 x 9.5 liter fluid capacity
Different fluid options for different applications
Low fluid sensing
Onboard DMX
On-board control panel
Optional hand-held remote control
Physical
Length: 1140 mm (44.9 in.)
Width: 645 mm (25.4 in.)
Height: 655 mm (25.8 in.)
Dry weight: 167 kg (368.2 lbs.)
Performance
Max. fog output (approx.): 5000 m
3
per minute
Max. operating time at full output (approx.): 108 minutes
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 18 minutes
Control and Programming
Control options: Onboard control panel, DMX
Compatible remote controls: For limited control
DMX channels: 2 (output and fan)
Protocol: USITT DMX512/1990
Construction
Housing: Steel & aluminum
Heat exchanger: 2 x 2500 W, direct thermal protection
Fluid System
Fluid pump: Oscillating piston, high pressure X4
Onboard fluid capacity: 2 x 9.5 l
Fluid consumption at peak output: 500 ml per minute
Installation
Orientation: Floor or flying kit
Connections
Remote control: 3-pin locking XLR
DMX data: 3-pin locking XLR
Power cable entry: IEC-EN60309-2 Socket (Cee Type)
Electrical
AC power: 208 V 60 Hz / 220 - 240 V 50 Hz
Main fuse (208-240 V power): Onboard 25 A Breaker
Typical Power and Current
220 V, 50 Hz: 4327 W, 19.66 A
230 V, 50 Hz: 4729 W, 20.56 A
240 V, 50 Hz: 5150 W, 22.4 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 50° C (122° F)
Max. nozzle temperature: 200° C (392° F)
Approvals
EU safety: EN 50 081-1, EN 50 082-1
EU safety: EN 60 335-1 (1995)