LED flame effects light ember orange & flicker controller - prop scenery EOKIT1

Description

The SBL2-EO (Ember Orange) LED bulb in this kit is designed specifically for simulated fire in specialty lighting projects. The kit includes the EEL1 (Enhanced Effects Light) cable socket, FEC1 (Flicker Effects Control), and battery holder for 8 AA cells. This kit provides a dynamic flame ember orange flicker lighting effect. Typical applications are flame simulation props, and scenery needing a coal or ember glowing fire look.
Multiples kits can be used for an increased dynamic fire effect and/or for higher light output. The flicker effects control, or flicker generator, can be set for any of six dynamic flicker modes each mode comprising a different flicker pattern. The control may also be set at any of the 10 flicker rates. When set at a slow rate the effect is soft glowing coal or embers. When set at a rapid rate, the effect is simulated fire. The control also has one static dimming mode.
The SBL2-EO (Silicone Bi-pin Lamp, Ember Orange) is a bulb that uses a total of 24 LEDs and measures 1.125” tall 0.5” diameter ... Additive color mixing of 12 yellow and 12 red LEDs is used to produce the ember orange glowing fire color that is polychromatic with a dominant wavelength of 605nm. The light output is a nominal 19 lumens at a 1,000 Kelvin nominal color temperature. Operating time from 8 AA cell batteries can be expected to be greater than 12 hours. The overall length of the bulb cable socket control and battery holder assembly is 36 inches nominal. Batteries not included.
Application
Western themed camp fire scenery props
Theatrical stage simulated fire
Themed entertainment projects
Jack-o-lantern pumpkin props
Faux fireplace building
Coal basket props
Cowboy cauldron fire pit props
Glowing coal and wood ember fire simulation
Blacksmith coal forge stage props
Flicker flame torch props
Flickering lantern props
Amusement show projects
batteries not included