500W ER11 Air Cooled CNC Spindle Motor+ 52mm Holder+Speed Controller+Drill Bits

Description

1 x
500W ER11
Air-Cooled Spindle Motor
1 x 220V Speed Governor
1 x 52mm Mount bracket(with 4 screws)
14 Pcs ER11 collet
Full set 10pcs drill bits
​
Air Cooling Spindle Parameter:
Manufacturer Model: 500W
Operating voltage: 12-100VDC
Power: 500W
Idle speed: 2000-12000 rev/min
Torque: 0.5NM
Insulation resistance:> 2 megohms
Dielectric strength: 400V
Diameter: 52mm
Chuck portion length: 45mm
Chuck portion diameter: 16mm
Motor Length: approx. 190mm
High precision spindle run out : 0.01-0.03
Can be used for solid wood PCB engraving drilling and so on
Motor Governor Detailed Technical Parameters:
1. Input voltage: AC110-AC220V±10% 50/60Hz
2. Current limit: 6A
3. The adaptation motor power: 50W-500W
4. Armature output voltage: DC0-100V adjustable
5. Dimensions: 130*100*51mm(L*W*H)
6. Wiring: terminal (convenient)
52mm Mount bracket(with 4 screws)
Working Environment:
1. Ambient air temperature: -10 ~ 40 ° C
2. The relative humidity of 85% or less, well ventilated
3. Installed in a well-ventilated, no severe impact, no vibration, no explosion of dangerous media a
nd no conductive metal particles of the occasion
Product Features:
1. The use of pulse width technology to make the speed more stable, low speed under the big
2. With over-current protection cut-off device to make the performance more reliable
3. With a soft start device to eliminate the motor starting current is too large
Application:
For engraving machine, fit for collet: ER11 size: 1mm / 1.5mm / 2mm / 2.5mm / 3mm / 3.5mm / 4mm / 4.5mm
5mm / 5.5mm / 6mm / 6.5mm / 7mm